Preparing for the Flipper One Kickstarter and opening pre-orders
113 points by user_7832 2 hours ago | 49 comments
https://docs.flipper.net/one

vr46 2 hours ago
I already nabbed my coupon for the pre-order last week - looks super cool!

My F0 is always close at hand, doing everything from being my go-to trigger for whatever random thing I'm playing with, to being an instant output for any signal I'm trying to read. Plus it's a really fun educational tool for myself and various kids around - I keep a load of little NFC 216 tags around, in my bag, in a pouch attached to my Mac, and showing both young and old how to use them, and read them with the phone, leads to conversations about treasure hunts, hiding them in the pub, showing counters with amusing messages...

We used it as a metronome the other day with its blue light, and on the flip side I've been looking at ways to integrate it into my EDC as a modern key, or a programmable keyring. It isn't super-secure, but that does make it easier to work with.

I'm excited about the F1, mainly curious about its logic analyzer capabilities, since I'm actually designing and building one - even it is fifty times worse than a commercial one, I just want to know how they work. And these little devices help find out how other things work.

reply
phil-martin 11 minutes ago
This is the part that sold me:

“Multi-WAN network toolkit — connect up to 5 uplinks. Configure dynamic routing, failover, load balancing, and firewall rules. Use it simultaneously as a Wi‑Fi hotspot and client. Tunnel traffic through a VPN and multiple gateways. ”

I haven’t been able to find an off the shelf device that provides this. I travel a fair bit and when sitting in an airport mobile hotspotting is often unusably slow. If I can use this to securely connect to public unencrypted wifi, it will make travelling that little bit easier

reply
Daniel_Van_Zant 2 hours ago
I'm curious has anyone tried hooking up abliterated large language models to systems like this for physical pen-testing? I know there has been lots of hype lately on the capabilities of large language models at finding and exploiting bugs in online software. I know very little about physical pen-testing but would large language models also open up vulnerabilities in the kinds of things this interfaces with or do digital door locks and such have higher levels of security?
reply
monster_truck 26 minutes ago
I think you're overcomplicating things a little bit. A better example of this would be like what I did recently, where I needed to change some non-user-accessible values on a device, could not get ahold of the firmware, and the spec sheets were all behind NDA walls. Instead, I opened it up and read the flash directly, thankfully it was unencrypted, and let deepseek pick it apart and give me a script to fuck with various values including the one I wanted to edit.

Basically like using a gameshark/game genie with extra steps.

reply
app134 33 minutes ago
I pretty thoroughly reverse engineered the unitree Go2 robot dog with a benchtop mobo from a scrapped bot, a USB-TTL convertor, and Opus 4.6

Used the findings to release a jailbreak so you can program the cheap consumer version ($1.6k) as though it were the expensive research version ($15k)

Very fun exercise

https://github.com/a-bissell/UnLeash-Lite

reply
devmor 2 hours ago
I don't know about security devices specifically, but I have semi-successfully reverse engineered some abandoned IoT devices by giving DeepSeek and Claude access to a USB flash writer, logic analyzer and power relay for the devices.

I imagine they could be used to do physical pen testing just as easily. From my experience with digital door locks, their level of security is on average, somewhere between a piece of tape and a $5 padlock.

reply
iugtmkbdfil834 54 minutes ago
Lmfao, I am tempted to play with that. Did you write up any of those or all just random one-offs?
reply
rootsudo 22 minutes ago
great idea, thank you for this
reply
AndrewKemendo 2 hours ago
I have one collecting dust that I stopped using years ago just because I got bored with it so if you wanna work together, I’m happy to. I’d love to see it get more use.
reply
exe34 2 hours ago
I think the new one might be better as you can run an agent or server on it and get llm to use it. With the old one you had to push buttons as I understand it?
reply
orsorna 40 minutes ago
I was just researching and it appears you can communicate with the Zero over usb serial.
reply
monster_truck 29 minutes ago
I really like my zero, I don't use it daily, nor would I want to.

But when I do actually need it, for doing something like reading/flashing SPI, I'm very happy I have it.

reply
dang 2 hours ago
Related - others?

Flipper One – we need your help - https://news.ycombinator.com/item?id=48220647 - May 2026 (482 comments)

Flipper One Tech Specs - https://news.ycombinator.com/item?id=48212046 - May 2026 (177 comments)

reply
jubilee33 2 hours ago
I wish they would sell more replacement parts for the old ones. Like the main board or the sub boards. I have broken mine twice from daily pocket use in wet environments and I don't feel like scrounging parts anymore.
reply
sbarre 41 minutes ago
The High Boy is a similar device that seems to incorporate radio and network, but I think it has a few less features?

https://highboy.com.br/

reply
dalben 25 minutes ago
Just last week I was trying to sell my Flipper Zero as I don't use it. Even though it's legal, my listings have been deleted as the platforms are overzealous as it "might be used for hacking".

Well, if anyone is looking for one in Europe, let me know.

reply
kristopolous 36 minutes ago
Is this going to also be at some nose-bleed sky-high ransom price like everything else computer these days?

What are we looking at? $400? $500?

Just as a reminder, last year, as in 2025, a raspberry pi with 8gb was $89... so please don't tell me that paying $400 or $500 for this is normal and expected.

reply
elAhmo 32 minutes ago
$379 + $20 for the preorder coupon
reply
embedding-shape 33 minutes ago
Does your browser not handle <a> tags or something? The preorder site says $379 multiple times, all over the place.
reply
kristopolous 29 minutes ago
this was the original link: https://docs.flipper.net/one also the new link doesn't have $ on it's body anywhere or the text "37" yet alone "$379"

this one does https://flipper.net/products/flipper-one-preorder

I still stand by it. I'm not buying anything at these extortionist cartel prices. Not a single $500 usb thumb drive or $1500 ram or $2000 platter and certainly not at $400 thing that would have cost $100 last year.

reply
supersimpleguy 25 minutes ago
If only there was some kind of website that talked about the product, linked here on HN.

I guess we’ll just never know.

Genuine question, how do you get through the day?

reply
coffeebeqn 2 hours ago
That’s pretty cool you can dock it to full-fat Linux it looks like?
reply
vbezhenar 2 hours ago
It's ordinary linux inside. You can connect it to any display with USB-C cable.
reply
imzadi 2 hours ago
How long is the pre-order window? I didn't see that on the site, but might have missed it.
reply
MOARDONGZPLZ 46 minutes ago
Until the Kickstarter starts, which is planned for November. At which point you can redeem the coupon and back the Kickstarter and get it at a “special price” which is estimated to be $379 (might change up or down). Presumably this is lower than the Kickstarter price itself without the reservation coupon. A bit of a convoluted system, but you can get your $20 back anytime, and it automatically refunds if you don’t back the Kickstarter or the Kickstarter never launches, so that’s cool.
reply
auguzanellato 27 minutes ago
Sigh, all I wanted was a Zero successor with a more powerful MCU to mess around with, this seems more like a mini PC of sorts.
reply
supersimpleguy 23 minutes ago
It’s got M.2 and GPIO. This is exactly what you just asked for, but for some reason you saw a picture of it plugged into a monitor and declared it nothing more than a mini PC.
reply
ipkstef 2 hours ago
i have my og flipper gathering dust :tears:
reply
thenthenthen 2 hours ago
Dust it off! It was a weird device, mostly a toy? This new one is… yeah not sure. More of the same?
reply
internetter 45 minutes ago
> It was a weird device, mostly a toy?

While I do agree it was/is weird, and it was/is hard to qualify, toy isn't the word I'd reach for. I find myself using it for some odd task once every few months. Cloning a keycard, temporarily standing in for a broken remote, etc. I'm glad I have it, but I was given it for free and I wouldn't pay for it.

reply
pcurve_ 50 minutes ago
same, I assumed it would have full support for nfc which is the protocol I care most about and ordered via kickstarter

only to find out nfc-b would never come

meh

reply
Jemm 2 hours ago
I read the page but not being an expert on Flipper I am not confident I can tell the difference from the Flipper Zero.
reply
GuB-42 47 minutes ago
It is a completely different device.

Flipper Zero is for the physical layer: radio, RFID, IR, etc... It is based on a small microcontroller and is mostly "bare metal", think Arduino, ESP32,...

Flipper One is for the network layer: Ethernet, Wi-Fi, 5G, etc... It is a "real computer" running Linux, like a Raspberry Pi.

reply
et-al 54 minutes ago
Yeah, they should have included a comparison on the Kickstart page. If you check out the "we need your help" page, that has a chart with "Zero vs One":

https://blog.flipper.net/flipper-one-we-need-your-help/

The two devices are complementary.

reply
miladyincontrol 2 hours ago
flipper zero is just a small device with an SMT32 MCU, flipper one is a whole bloody linux computer, with an rp2350

I suppose the idea is it combines workflows you'd use a flipper zero + pc for into one device. Neat in idea, im not certain who it's truly for in practice. A flipper zero 2 with wifi built in and some minor improvements would have been much more welcome in my eyes.

reply
monster_truck 31 minutes ago
The wifi board works fine with the zero, integrating it into the device is a pain in the ass, far from a 'minor' improvement.
reply
jubilee33 49 minutes ago
I used it instead if needing to have a pocketful of access keys and garage/gate remotes. Also the remote control was great for random AC units or muting the sound on the airport lounge newsmax horror television.

but it broke too much and I found a better solution

reply
bronson 36 minutes ago
Don't leave us hanging! What's the better solution for you?
reply
jubilee33 10 minutes ago
Sorry...for the keys I got a very small chameleon ultra, fits on a keyring, the pocket toy has been replaced with a M5 cardputer which is better at being a real tool than flipper as it has all the sensor options.

The flipper was still a very nice thing to put in the pocket for along time for sure

reply
Eji1700 2 hours ago
Zero does mostly "radio" stuff (RFID, subghz, etc). One does mostly "network" stuff (wifi, 5g, etc).
reply
ChrisArchitect 2 hours ago
reply
tamimio 41 minutes ago
Battery life?!

Also, this feels.. redundant, i already have those in my laptop, unlike flipper zero, it was about radio, rfid, nfc, ir, among others with great battery life. Right now my laptop i had it customized with modular 5g modem, SDR, meshcore, alfa, among others.

reply
forvelin 2 hours ago
what are their connection with Russian Federation ? all their job ads asked for russian iirc.
reply
sigmoid10 2 hours ago
Flipper was born in Moscow from a collab mostly made of Russians and Ukrainians. They were pretty outspoken against the attack on Ukraine and have moved headqurters and almost completely relocated their employees since then.
reply
kgeist 2 hours ago
The original developers are from Russia. They now seem to have an office in London
reply
devmor 2 hours ago
My only concern with ordering a Flipper One is import controls. I've heard of Zeros getting seized in customs.
reply
supersimpleguy 17 minutes ago
Absolutely a thing. I’ve got documentation that says I work in ITSEC but I’ve never been stopped with mine. However I don’t travel to BRIC-aligned countries for the most part so YMMV.

I tend to wipe mine before international travel and just stick on IR remote stuff, juuuust in case someone wants to ask a lot of questions. It’s easy enough to restore the back up I take beforehand.

reply
Animats 39 minutes ago
Is it wise to buy this until someone has taken one apart and checked for backdoors?
reply
dgellow 37 minutes ago
What kind of backdoor would you expect in such a device?
reply