Garage Door Spam
68 points by harrisonpage 3 days ago | 24 comments

dj68k 6 minutes ago
Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.

Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.

I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.

reply
atonse 4 minutes ago
Had the same issue (the original ratgdo being unstable) and I finally just got the ratgdo32 and it's been working beautifully with HomeKit.

I wonder if someone will try to use AI to optimize the 8266 version to better handle RAM etc.

reply
wallst07 2 hours ago
Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.

I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.

Ecobee you're next, and I hope you go down in flames having such crap software.

reply
avaer 47 minutes ago
It's the hijacking of notifications that gets me the most. App store providers should ban any application that puts ads there.

Also would be nice to have a law making ads and payment mutually exclusive. Otherwise the future is one where all products evolve to have both.

The "free market" cannot solve this in a world where products can be (and are) rugpulled to have ads anytime.

reply
zf00002 13 minutes ago
My bank sends me emails that are ads for their other services but I guess if they mention my account and claim the email is for account purposes or something they get to claim it's not spam and I can't unsubscribe.
reply
steve_taylor 16 minutes ago
Apple used to forbid marketing notifications, but they relaxed their policy a while ago.

What's really needed is system-wide notification channels, a hard requirement on app developers that marketing notifications go into the marketing channel, per-channel notification permissions, and a global off-switch for marketing channel notifications.

Apple needs to break this shitty business model. There's no incentive for Apple to keep allowing it.

reply
kalleboo 9 minutes ago
They relaxed their policy because they themselves were doing it and it seemed too hypocritical even for them
reply
euroderf 26 minutes ago
> Also would be nice to have a law making ads and payment mutually exclusive.

Likewise for online content. Hello, New York Times. Et al.

reply
bookofjoe 21 minutes ago
I pay plenty for a New York Times subscription and the content is riddled with huge ads.

Today's front page screenshot 3 minutes ago:

https://imgur.com/a/1hgKeKf

reply
jareklupinski 21 minutes ago
the noise i made after setting up my pihole and seeing an ad for some Apple Service Subscription inside the _Settings_ app
reply
newguytony 34 minutes ago
Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.
reply
ryandrake 44 minutes ago
Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.
reply
thedanbob 12 minutes ago
Don't even necessarily need to solder: I upgraded my garage door with a Shelly relay, a reed switch, and ESPHome. Maybe the ratgdo devices are doing a bit more, I'm not familiar with them, but there's probably still much cheaper pre-built boards available that can do the same job.
reply
theoreticalmal 22 minutes ago
My very first tech project was a relay board, raspberry pi, and learning python. Long before AI. It was very fun
reply
wingspar 2 hours ago
I went with a Meross MSG100hk garage door interface. It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.
reply
anticorporate 24 minutes ago
I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).

A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.

I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.

But, why?

It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!

I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/

reply
harrisonpage 3 days ago
In which I bypass myQ for an open source solution
reply
phrotoma 36 minutes ago
Great post, right to the point. Love it.
reply
yakshaving_jgt 2 hours ago
Ah, this is so cool.

When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.

reply
HalcyonCowboy 28 minutes ago
That’s exactly why I setup an open source device on my older garage door. It’s only accessible from my local network, and I have my appletv setup as a HomeKit hub, so I can double tap my off brand cardo to give the voice command to open the garage door on my bike. My only irritation is that each major iOS update changes the settings on condirming the command, so out of nowhere my phone will ask to be unlocked to confirm the command. Then I have to figure out what setting changed on iOS to reconfigure it again.

I also have a nodered automation setup that sends a push notification if the garage door is open for more than 30 minutes, so I don’t accidentally leave the garage open overnight. Works great.

reply
afn 52 minutes ago
They seem to have disappeared, but there was a company called Flash2Pass (later Flash To Open) that made a garage door controller activated by flashing your high beams twice. I have it on my bikes and it makes for a really seamless entry; I don't have to take my hands off the controls, and the range is long enough that the door is open by the time I ride up.

Another option: https://www.youtube.com/watch?v=d3rfaCfImwE :D

reply
vocram 26 minutes ago
Unluckily they discontinued making that second option.
reply
yakshaving_jgt 22 minutes ago
That video caught me off guard!
reply
silisevic 35 minutes ago
[flagged]
reply
Scene_Cast2 39 minutes ago
Out of curiosity, how's the device doing on FCC certification?

Using a pre-certified module doesn't let you bypass certification.

reply