I have a Sony Mavica camera that sees some use, they're fun for taking on walks and collecting some 2000s style photos. I usually dump it on a old PC for the full effect, but a wireless floppy drive like this would certainly be an upgrade for the modern Mavica or floppy disk user. They exist! There's also a subreddit dedicated to Mavicas and their photos if anyone is interested to see how they look:
> The LCD looks like a segment display. Unused segments and icons show as light "ghosts" and come on in dark ink when they are active.
Attention to detail is second to none. I bet this feels satisfying to hold and operate, too.
It actually wasn't quite as bad as it sounds for reading, but writing never really worked very well. I don't know the details of how NFS works well enough to say, I'm wondering if it does some kind of out-of-order writing that doesn't work with the WORM-style LTO standard.
Though I don't deny that it would be cool to have a "magnetic" interface, which would in theory work on any device that shared the physical format.
Closest we've come is this: https://www.youtube.com/watch?v=0QFvj2HpCu0
But while it works with normal drives, it requires a special driver rather than truly pretending to be a disk.
I am often on group trips where we end up sitting somewhere for hours on end without cell signal (military, hurry up and wait). A pocket-sized NAS that could plug into power and share a media library via wifi to nearby devices would be VERY useful. I have toyed with this using a phone/tablet to share but it was always tricky. A dedicated portable NAS would be much easier.
This already exists. There are many portable WiFi APs out there. Some of them have a built-in battery or can be powered via USB so you can use some other portable power source (which could of course be one of your devices you want to connect via its AP), so you don't even need to have wired power to plug them into for short use.
The media sharing side isn't massively advertised as the main feature most want is to use them to share a cell connection (or another WiFi connection), and perhaps offer VPN access over that connection, but a number of them have USB ports that are cable of powering and mounting (depending on filesystem of course) an SSD so its contents can be shared via an HTTP interface or maybe a common file share protocol like SMB.
Even if direct media sharing is not supported, you can arrange that from one of the devices that you connect to the AP.
A quick search for “portable hotspot” and “travel router” finds no-name devices claiming 8-to-10 hours use time per battery charge (obviously take that with a pinch of salt!), just mobile->WiFi/WiFi->WiFi bridge or plain AP (no VPN or file sharing), for £17, and devices from more recognised companies for ~£30. Units with built-in VPN support (or running OpenWrt where you can probably add that yourself) start at more like £40 (GL.iNet devices claim OpenVPN and WireGuard support, I assume that is similar on other devices but you'd have to find more detailed specs than the sales page to check that). There are fewer offering built-in storage sharing than I expected but they are available (though with storage via SD or USB - I'm sure I've seen units with the option of an internal NVMe or SATA drive advertised but none came up in the first pages of my search results).
It sounds petty, but even having to plug in a USB drive to an external port is not ideal as they break easily. I would prefer a barrel jack over an easily-broken USB-C (I have a couple barrel-USB-c adapters). Internal lithium batteries are a no-go due to flying/packing/mailing rules.
Ideal package: Something the size of a coke can, with only a power port, that can share a 1 or 2TB media library amongst 10-20 devices within a 50-foot range. No fiddly bits to break, no external drives. Something that could be dropped a couple times without issue. Encrypted file containers (veracrypt) and rocket.chat would be stretch goals.
Doing research in the last couple hours, some of the new rugged Pi cases with M.2 ports seem be the way to go.
A Pi (or any other small-ish linuxey-type-thing) can work, but the built-in wifi isn't very good on a Raspberry Pi. A different wireless adapter connected to USB helps tremendously, but now: There are two boxes.
Consequently, it seems that there are always going to be two boxes (even if you print or find a special case) for any performant solution.
So if it's going to have two boxes, then: Why not put the big/fast storage in one little box, and the compute+fast wifi in another little box?
Something like a Beryl 7[1], maybe?
Diminutive box. Fast networking (wifi 7 with usefully-folding antennas, 2.5-gig ethernet). Runs from USB C with proper multi-voltage PD, so you can standardize on power supplies/chargers with the rest of your kit.
Has enough built-in storage and RAM to be a file server (512MB is still a ton for this job and I'm willing to die on this hill), and that internal storage is soldered so the fragility of MicroSD is eliminated. Quad-core, 2GHz. Can run official OpenWRT builds[2] if you prefer that.
It has USB 3 for external storage, which will be more than plenty to saturate a gigabit ethernet link (I'm also willing to die on this hill).
Plug in the SSD while in-use. Unplug when not in-use. Stow both in an inexpensive zippered travel case that's meant for that kind of thing[3].
Bonus: Connect SSD to a Real Computer whenever that's useful instead.
[1]: https://www.gl-inet.com/en-us/products/gl-mt3600be
[2]: https://openwrt.org/toh/gl.inet/gl-mt3600be
[3]: https://www.gl-inet.com/en-us/products/travel-gadget-organiz...
Again, pricy, but it is really nice as a photographer.
This sounds like a job for any something-pi shaped device with PCIE port and AP capability. opi rv2 is pretty small, but I don't remember if it can do wifi ap
The backup routine was:
1. Plug the card to the card reader, plug it into one of the USB3 ports of the Pi.
2. Plug the NVMe disk into another USB3 port.
3. Power the contraption from my USB powerbank.
4. Plug the phone to the Pi on another USB port. Enable network sharing over USB.
5. Connect Bluetooth keyboard to the phone.
6. Open a terminal on the phone,
7. Find out the IP address of the Pi that the phone's DHCP server gave
8. SSH into the Pi.
9. Run rsync to copy files from the SD card to the NVMe disk (luckily the Linux distro auto-mounts the USB storage devices).
After all that's done I can plug the NVMe disk straight to my phone to browse the images...
I've been thinking of creating a Pi distro that creates a WiFi network, and use a Jenkins-like web UI so I can just plug everything in and control the procedure from the phone's browser. One day..!
Question: is there a reason that you couldn't skip the pi and just use a USB-C hub and your phone to copy from the reader to a SSD? pre USB-C I did this but it was kludgy using apple's "camera connection kit".
No powerbank, no Raspberry clone, no card reader, no networking, no ssh.
On a daily basis very easy to use an android GUI file management application to copy or move all the files from the microSD card to the NVME storage, doing a bulk select and then 'move' to mounted destination. Or write a tiny shell script that can run in termux that moves all new files that don't exist in the NVME drive destination.
If I were doing this and I had some reasonable level of confidence in the wifi where I was staying temporarily, I'd try to set up a script to periodically do an incremental back up from the mounted filesystem of the NVME drive to a small fileserver that lives in my home office, via VPN.